In this guide I will go through setting up an xbox 360 kinect sensor on PC
Note you will need the usb power adapter to power the kinect and connect it to the pc.
Real ones are pretty expensive but you can find cheap ones on AliExpress or other sites.
Once these are downloaded, install the SDK
Next install the Developer Tookits
If you start Device Manager you should be able to see the Kinect Installed.
Startup the Developer Toolkit Browser
Go to the Tools tab and select Kimnect Explorer-D2D
You should now see the output from your kinect
Congratulations, you’ve now installed and set up a Kinect 360 Sensor